Xilinx has been one software used to program the FPGA board in Verilog. Currently (at the time of writing) quite funnily this software fails to install in Windows 11 and has some issues installing in Windows 10. Linux however does not fail us here. This tutorial has been picked up from this YouTube tutorial but with a few changes.

First Step

As of 2022 in April the latest version of Xilinx is 14.7. Head over here and click on 14.7, scroll down to the ISE Design Suite and install the Full Installer for Linux. A simple popup to sign-up/in will come up.

Extract the contents

After the download is complete extract the file using the following command -

tar -xvf Xilinx_ISE_DS_Lin_14.7_1015_1.tar

This extracts the whole tar file.

Running The Setup

To further setup the Xilinx software we run the following -

sudo ./xsetup

This will run the setup!

Error fixing

During this you may run into an issue which says libncurses.so.5: cannot open shared object file: No such file or directory. A fix to this is done by running

sudo apt-get install libncurses5

Next Steps

The next steps are intuitive and can easily be figured out by clicking Next

Finally Running It

Run this command first -

source /opt/Xilinx/14.7/ISE_DS/settings64.sh

and then just type

ise

in the command line. You are good to go!

Error I faced

The video mentioned above has a step involving adding the source.. command to .bashrc. This led to errors as well as problems on my bash terminal. So avoid it and follow the step mentioned above.